Dipartimento d'Ingegneria

ACOUSTICS LABORATORY

The Acoustics Laboratory has many apparatus, equipment and numerical codes up to date with the advanced measuring, predictive and intervention techniques. In this Laboratory it is possible to carry out measurements, predictions and planning in...

Stochastic Mandible Generator

DSPLab

The Digital Signal Processing Laboratory was founded in 1997 by a group of professors and researchers of the Telecommunications section of the former Institute of Electronics, then DIEI, and now DI. Right from the beginning,...

POKer: a partial-order derivative kernel for sequences with alternative symbols

POKer: a partial-order kernel for sequences with alternative symbols Dr. Maryam Abdollayhan (Queen Mary, University of London) Department Of Engineering, aula adiacente Aula Magna, 05 July 2016, 5pm

Recent advances in dental optics – Part II: Experimental tests for a new intraoral scanner

by Silvia Logozzo, Ari Kilpelä, Anssi Mäkynen, Elisabetta M. Zanetti, Giordano Franceschini A new device for 3D oral scanning has been designed and tested: it is a two channel PTOF (pulsed time-of-flight) laser scanner, designed for...

Service and Industrial Robotics and Automation Laboratory (SIRALab)

The Service and Industrial Robotics and Automation Laboratory (SIRALab), which is part of DIEI, carries out research activities on control systems, robotics and autonomous systems, engineering for medicine and biology, and systems biology. The group...

HySchools: Hydrogen in Schools

Hyschools è un progetto finanziato dall’Unione Europea nell’ambito del programma Erasmus+ con lo scopo di promuovere nelle scuole di tutta Europa la cultura dell'idrogeno come energia. Le tecnologie basate sull’Idrogeno avranno infatti un ruolo fondamentale...

MSM-LAB

ICONS 2015

The 10th International Conference on Systems will take place in Barcelona, Spain, from April 19 through April 24, 2015. The conference covers fundamentals on designing, implementing, testing, validating and maintaining various kinds of software and...

ReLUIS2014

PROGETTO ReLUIS 2014Convenzione tra ReLUIS e Università di Perugia, Dipartimento di Ingegneria (DI)A decorrere dal 1 febbraio 2014, il gruppo di lavoro dell’area Geotecnica partecipa al Progetto ReLUIS2014.Coordinatore di UR: Vincenzo Pane. Componenti Unità di...

THERMOTECHNICS LABORATORY

The activities carried out in the Thermotechnics Laboratory are focused on the issues in heat transfer, energy engineering and development of renewable energy sources.There are systems for measuring thermophysical properties of materials (thermofluximeters, infrared thermal...

A Benchmark Problem of Vector Magnetic Hysteresis for Numerical Models

E. Cardelli, A. Faba, " A Benchmark Problem of Vector Magnetic Hysteresis for Numerical Models", IEEE Transactions on Magnetics, VOL. 50, NO. 2, February 2014, ISSN: 0018-9464.  Abstract - In this paper we present a benchmark...

GEOEYE1-WV2 project just finished

'GEOEYE1-WV2: generation of high resolution geo-referenced data from GeoEye-1 and WorldView-2 satellite images' (ref. CTM2010-16573) has finalised. The project, in which Dr. Francesco Bianconi participated as a member of the research group, was coordinated by...

LIFE+EMaRES

The third law of thermodynamics states that the Universe’s entropy is constantly increasing. The Entropy is a scientific and extremely complex concept which, translated in simpler terms, represents the level of “Disorder” of a given system. It is impossible to reduce the Universe’s...

SOFTWIND - PRIN 2015

SOFTWIND - PRIN 2015  www.softwind.it E' on line il sito web del PRIN 2015 finanziato dal MIUR, Progetto di Ricerca di Interesse Nazionale dal titolo "SOFTWIND turbines" Il progetto coordinato a livello nazionale dall'Università di Camerino vede...

Hand-designed descriptors vs. pre-trained convolutional networks: a comparison of two strategies for colour texture classification

ELG 10 at 14:00 Tuesday 20th November 2018.City, University of London.Abstract: Colour texture classification plays a fundamental role in a wide range of applications, as for instance surface inspection and grading, content-based image retrieval,...

Non-planar drawings with large crossing angles

Crossings are considered one of the major factors that reduce the readability of the drawing of a graph. This is not only suggested by intuition but also confirmed by cognitive experiments showing that human performances...

High Reliability MEMS redundancy Switch

Reliability is a major issue for any satellite since it is almost impossible to envisage any repair work during the full mission lifetime e.g. 15 years for today’s telecommunications satellites. Redundancy is implemented in order...

LABORATORIO DI TERMOTECNICA

L’attività del Laboratorio di Termotecnica è indirizzata all’analisi delle problematiche di trasmissione del calore, energetica e sviluppo delle fonti rinnovabili.Sono disponibili sistemi di misura delle proprietà termo-fisiche dei materiali (termoflussimetri, termocamere a infrarossi, analizzatori spettrofotometrici)...

Robotics and Perception

Modern robot research focuses on complex robot-human and robot-environment interaction. The ability to perform complex actions is connected to the quality of spatial perception the robot has and this depends not only on good sensors,...